Zelmer ZCK7010L, User Manual

Page: 8 / 52

-staff kitchen areas in shops, offices and other working
environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
Never immerse the appliance in water or any other
liquid.
If the kettle is overfilled, boiling water may be ejected.
Warning: potential injury from misuse!
Heating element surface is subject to residual heat after
use.
Allow the kettle to cool completely before cleaning.
Always remove the plug from the mains before cleaning
the kettle.
Do not use any abrasive cleaning agents
–
such as
emulsions, creams, pastes, etc.
–
for cleaning the
kettle.
IMPORTANT WARNINGS
Any incorrect use or improper handling of the product shall render the warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle
Only fill the kettle with water. Milk and instant beverages will burn and damage the appliance. Never
operate the kettle without water and do not over fill it; observe the min and max markings. If the kettle is
too full, the water will boil over!
Do not put the jug on a stove or in a microwave for re-heating of water.
Always place the kettle on a stable, smooth, flat surface; the power cord must not hang loosely off the
edge of a table (or any other work surface) or touch a heated surface.
Do not use the kettle with the lid open.
Do not remove the lid when the water is boiling.
8
EN