Zelmer SH2010, User Manual

Page: 106 / 116

106
Polski
Magyar
Română
Ру
сск
ий
Česky
Slovenčina
Бълг
арск
и
Ук
раїнськ
а
English
SH2010-005_v01
Charging
1
Make sure that the shaver is off. To turn it
off press the ON/OFF button. Put on the head
cap.
The battery cannot be charged
when the shaver is on.
2
Insert the socket plug of the AC adaptor
into the socket at the bottom of the shaver.
Before putting the plug of the AC
adaptor into the socket of the
shaver, make sure that the socket
is completely dry to prevent any
possible malfunction.
3
Insert the outlet plug of the AC adaptor into an appropriate outlet (see the rating plate
on the AC adaptor).
– The shaver is fully charged in approximately 60 minutes.
– Charging may be completed in less than 60 minutes if the safety function
works to prevent overcharge.
4
When charging is completed, unplug the AC adaptor from the outlet.
When unplugging the AC adaptor, do not pull the cord, as this may damage
the AC adaptor. Be sure to hold the plug to pull it out.
On a fully charged battery the shaver will operate for approx. 40 minutes.
Power supply
100-240 V AC
ON/OFF
button
Battery level indicator
lights
FULL
EMPTY
Battery level indicator
●
During charging:
The lights flash and then light up one by one from
bottom to top indicating the battery level.
●
After full charge:
All the lights flash.
●
While shaving:
The lights go out one by one as the battery level
decreases. When the battery is empty the “Empty”
light comes on.