Zelmer 34Z018, User Manual

Page: 36 / 36

GW34-018_v01
Ecology – Environment protection
Each user can contribute to protect the environment. It is neither difficult nor expensive. In order to do so:
Return cardboard packages to recycling points.
Throw polyethylene (PE) bags into appropriate containers. Batteries contain substances harmful to the natural
environment. Do not throw them away with other household waste. Return used batteries to recycling points. Before
disposing of or returning the appliance to a recycling point make sure to remove the batteries from the battery
compartment. Return a worn out appliance to an appropriate collecting point as the components of the appliance may
pose a threat to the environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any damages resulting from unintended use or improper handling. The manufacturer/importer reserves his rights to
modify the product any time in order to adjust it to law regulations, norms, directives, or due to construction, trade, aesthetic or other reasons, without notifying in advance.
3. The appliance is equipped with the function to measure the height of the weighed person. In order to measure
the height, switch on the height measuring device (while standing on the scale) using the appropriate button
and raise the device above your head. The height measuring device must be directed parallel to the ground so
that the sensor on the height measuring device meets with the sensor in the scale (a beep will be heard).
On the basis of the weight and height the appliance calculates the Body Mass Index (BMI). The BMI will appear
on the display after about 3s together with the weight and height.
For adult people the following BMI indicates:
Underweight <18,5
Normal weight 18,5–24,9
Overweight 25–29,9
Obesity stage I 30–34,9
Obesity stage II 35–39,9
Obesity stage III >40
The weight will automatically switch off after the measurement and if no actions are taken for 10 seconds.
CAUTION: If the display shows “ Lo ”, it means that the batteries are almost worn out and should be replaced with
new ones.
When “0.0” is shown on the display, the user may choose the unit
for measurement by pressing again the measurement unit selection
button (kg, lb, st:lb).