61
GW28-016_v01
Dry ironing
–
Always follow the garment manufacturer’s ironing
instructions mentioned at the garment label.
Connect the iron to a suitable mains supply outlet.
–
The red and green
–
control light (6)
glows for a moment and you can
hear single sound signal. Then the
control lights (6)
go off.
Turn the
–
temperature dial (7)
in clockwise direction to ●●● position –
control light (6)
glows and you can hear a single sound signal.
The red
–
control light (6)
starts flashing indicating that the iron heater
is on and you can hear a single sound signal.
The red
–
control light (6)
glows and you can hear the sound signal
when the required temperature is reached. The iron is ready for use.
After operation turn the
–
temperature dial knob (7)
in counter clockwise
direction to „
MIN
” position. The iron is switched off.
Disconnect the iron from mains supply outlet.
–
When the iron gets cool completely, store it vertically in a safe place.
–
Steam ironing
– Always follow the garment manufacturer’s ironing
instructions mentioned at the garment label.
Fill the water tank in as described under “How To Fill Water”.
–
Connect the iron to a suitable mains supply outlet.
–
The red and green
–
control light (6)
glows for a moment and you can hear
single sound signal. Then the
control
lights (6)
go off.
Turn the
–
temperature dial (7)
in
clockwise direction to ●●● position.
(For optimum steam quality, do not use
● or ●● setting for steam ironing).
The red
–
control light (6)
starts flashing indicating that the iron heater
is on and you can hear a single sound signal.
The red
–
control light (6)
glows and you can hear the sound signal
when the required temperature is reached. The iron is ready for use.
Move the
–
steam control knob (5)
to selected position, in order to set
the amount of steam.
After operation turn the
–
temperature dial knob (7)
in counter clockwise
direction to „
MIN
” position. The iron is switched off.
Move the
–
steam control knob (5)
to
position.
Disconnect the iron from mains supply outlet.
–
When the iron gets cool completely, store it vertically in a safe place.
–
Burst of steam
– Always follow the garment manufacturer’s
ironing instructions mentioned at the garment label.
This function provides extra amount of steam to remove stubborn wrinkles
at clothes and hanging garments.
Fill the water tank in as described under “How To Fill Water”.
–
Connect the iron to a suitable mains supply outlet. See „Preparation
–
for operation”.
The red and green
–
control light (6)
glows for a moment and you can
hear single sound signal. Then the
control lights (6)
go off.
Turn the
–
temperature dial (7)
in clockwise direction to ●●● position.
The red
–
control light (6)
starts flashing indicating that the iron heater
is on and you can hear a single sound signal.
The red
–
control light (6)
glows and you can hear the sound signal
when the required temperature is reached. The iron is ready for use.
Move the
–
steam control knob (5)
to selected position, in order to set
the amount of steam.
Press the
–
burst of steam button
(10)
once – steam will shoot from
the holes of the soleplate.
For stubborn wrinkles, wait a few seconds before pressing the
–
burst
of steam button (10)
again. Most wrinkles can be removed within
three presses.
Move the
–
steam control knob (5)
to
position.
Disconnect the iron from mains supply outlet.
–
When the iron gets cool completely, store it vertically in a safe place.
–
ATTENTION:
It may be necessary to press the burst
of steam button a few times to start this
function.
For optimum steam quality, do not operate
the Burst of Steam more than three times
after the control light goes off.
When the control light (6) glows do not
operate the Burst of Steam more than
3 times.
Summary of Contents for 28Z023
