Zelmer 24Z011, User Manual

Page: 36 / 40

36
FAN HANDLING
A – REMOTE CONTROLLER HANDLING
1. ON/OFF button
Press the button to switch on/off the fan.
–
The fan is started up with medium rotating speed. After 2 seconds it is
automatically switched to low rotating speed.
2. SPEED button (Rotating speed)
Press the button to select rotating speed (L, M, and H).
–
3. OSC button
Press the button to switch on/off fan head oscillation (horizontal oscil -
–
lation).
ATTENTION! – Do not try to change fan head direction turning it
with your hand „by force”; you can damage the fan.
4. MODE button
Press the button to select airflow mode.
–
You can change the airflow in turn:
RHY = natural mode (regular variable – sometimes stronger airflow, sometimes lower)
SLP = night mode (regular variable – airflow with reduced power) with repetitive pressing
the button.
5. TIMER button
You can press this button from time to time or press it in permanently. Time setting is step
–
by step increased every 30 minutes, which equals 7, 5 hours in 15 steps.
ATTENTION! – Never press timer button when the fan operates constantly. In such
case no adjustment diode glows.
INSERT – EXCHANGE BATTERIES
1. Remove battery compartment cover.
2. Insert two UM-4.AAA.R03 1,5V batteries and make sure that they
are arranged according to the drawing on battery compartment.
3. Reassemble the cover of battery compartment.
4. ATTENTION! – Do not use rechargeable batteries
.
ATTENTION! – Do not use rechargeable batteries.
PROPER HANDLING OF REMOTE CONTROLLER
1. Direct the remote controller ( 14) towards control panel ( 13 ) and press
selected button.
2. Remote controller works from max.5 m distance and left or right 60° angle from control panel.
B – CONTROL PANEL HANDLING
Control panel buttons can be used the same way as remote controller. They have the same func -
tions
Battery
Outline
Battery
compartment cover
Remote controller
Control panel
Max. 5m