39
●
Use the kettle for boiling water only.
●
Do not open the lid immediately after water has boiled
– steam might condense and appear on the exterior
of the kettle.
●
Do not place the kettle on or near hot objects.
●
Do not immerse the kettle or the power base in water
when filling or washing the electric kettle.
●
In the event that water gets into the inside electric
elements of the kettle, or onto the power base,
carefully dry these elements before plugging the kettle
into the mains.
●
Do not operate the kettle when empty.
●
Do not use the kettle with the lid open – the automatic
shut off will not work then.
●
Do not use any abrasive cleaning agents such as
emulsions, creams, pastes, etc for cleaning the kettle
body. They might remove graphic information symbols
such as: scales, marks, warning signs, etc.
●
The appliance is not intended to be operated by means
of an external timer or separate remotecontrol system.
The appliance is compliant with the requirements of the
following directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electromagnetic Compatibility (EMC) – 2004/108/EC.
The product is affixed with a CE Mark on the data plate.
For CE marking declaration of conformity please visit the
manufacturer’s website at www.zelmer.com.
SUGGESTION
Information on the product and
suggestions for its use
●
This appliance is intended to be used in household and
similar applications such as:
●
staff kitchen areas in shops, offices and other
working environments;
●
farm houses;
●
by clients in hotels, motels and other residential
environments;
●
bed and breakfast type environments.
In case it is used for food business purposes, the
warranty conditions shall change.
●
The kettle type covered by this user’s manual brings
water to boil very quickly and draws up to 10 A of
current from the mains.
●
Check that the mains fuses used can cope with this
level of power consumption. While boiling water,
unplug all other appliances from this circuit.
Technical data
The technical parameters are given on the data plate of the
product.
1.7 liter capacity.
Zelmer electric kettles are built in I class insulation and they
are equipped with supplying cord with grounding wire and
grounding plug.
The ZELMER kettle meets the requirements of the standards
in force.
This device complies with Commission Regulation (EC) no.
1275/2008 on ecodesign requirements.
Structure of the kettle
1
Metal casing
2
Water level indicator
3
Spout
4
Lid
5
Lid release button
6
Handle
7
On/off button
8
Storage space for the connecting cord
9
Supplying cord
10
Antideposit filter
11
Base
Preparation of the electric kettle for
operation
Before the first use, wash the kettle inside
(for washing instructions see “Cleaning and
maintenance”), fill it with water up to the “max”
level, and let it boil four times (use fresh water
each time) and wash again.
Operating instructions of the electric
kettle
1
Press the lid button
(5)
– the kettle lid will open.
2
Place the filter
(10)
in the kettle – if it was taken out
before.
3
Fill the kettle up with the desired amount of water (the
level is visible on the indicator
(2)
).
Do not boil the water if it is below the minimum
level or beyond the maximum level on the
indicator (
2
).
4
Close the lid.
5
Place the kettle on the power base
(11)
.
6
Put the plug of the connecting cord into a mains socket
with an earth pin – the upper part of the kettle body will light up.
7
Turn the kettle on by pressing the lever
(7)
– the indicator
light will come on.
8
The kettle switches off automatically when the water
has reached the boiling point, the lever switch returns to its
starting position – the light comes off.
A
B
17Z021-001_v04
