Zelmer 177, User Manual

Page: 38 / 44

38
Dear Customers!
Please read these instructions carefully. Pay special attention to important safety instructions. Keep
this User’s Guide for future reference.
Product features
The juice extractor is an appliance used to quickly extract juice from fruits and vegetables, separat-
ing the pulp at the same time. The speed has been set to obtain optimal quality parameters of the
extracted juices. The juice contains small fractions of fruits (vegetables) which are bene
fi cial for
health, but which can slightly reduce the juice clarity. It is an intended effect, the manufacturer of the
juice extractor came to the conclusion that it is more important to retain the nutritional, health and
dietetic value of the extracted juice rather than its clarity. The amount of the juice received from 1kg
of the product depends on the products’ freshness as well as on the cleanliness of the sieve and the
state of the grinding disc (e.g. for fresh carrot) and equals 50-60%. The parts having contact with the
processed products were made of materials approved for food contact.
Important safety instructions
Do not unplug by pulling on cord.
–
Plug the juice extractor only to a 230 V AC electrical outlet.
–
Do not operate the appliance if it has a damaged cord or if the housing is visibly damaged.
–
If the non-detachable part of the cord is damaged, it should be replaced by the producer or at
a proper service point or by a quali
fi ed person in order to avoid any hazards.
The appliance can only be repaired by quali fi ed service personnel. Improper servicing may
cause a serious hazard to the user. In case of defects please contact a quali fi ed service
center.
Do not use the juice extractor if the rotating sieve is damaged.
–
Check if the lid is properly attached with the clams before operating the appliance.
–
Do not release the clams when the appliance is operating and the sieve is rotating.
–
Turn off the device and unplug it from an outlet before replacing the equipment or approaching –
moving parts during use.
Always – unplug the appliance before cleaning, assembling or dismantling.
Use only the pusher to push the product. –
Do not overload the appliance with too much product or by pushing it too hard. –
Switch off the appliance immediately after noticing strong vibrations or reduced speed. Clean the –
sieve and its housing.
Stop the operation and unplug the appliance if the product is blocked in the feeding tube or on the
–
grinding disc. Remove the cause of the blockage.
Immediately stop operation and unplug the appliance if any liquid has entered into the motor of
–
the juice extractor. Return the juice extractor to a service point for inspection.
Do not expose the juice extractor to temperatures over 60°C.
–
Pay special attention while operating the appliance in the presence of children.
–
Do not leave a plugged in appliance unattended.
–
Do not place the juice extractor on a wet surface.
–
Unplug the appliance after operation.
–
Do not immerse the motor into water. Do not wash it under running water.
–
This appliance is not intended for use by persons (including children) with reduced physical, sen-
–
sory or mental capabilities, or lack of experience and knowledge, unless they have been given su-
pervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
–
Do not use abrasive detergents such as emulsions, cream cleaners, polishes, etc. to clean the
–
housing. They may remove the graphic information symbols such as: scales, marks, warning
signs etc.
Use a hard bristle brush to clean the sieve and the grinding disc.
–
Do not wash metal parts in the dishwasher. Aggressive detergents used in the dishwasher –
cause these parts to darken. Wash them manually using traditional dishwashing liquids.
EN