Strona
17
z
21
remove the inlet filter from its socket
25
, disconnect the bag full sensor tube and push out
the safety valve
28
.
Disconnect the PCB connector
33
.
Remove the motor
13
from the body
2
.
Bend out the shock absorber
19
catches to take off the motor casing
17
and remove the
damping inserts
32
.
Remove two screws
104
mounting the triac plate
35
from the motor,
disconnect the
connector between the PCB and the stator.
Bend out the shock absorber collar
19
, remove it from the motor.
Remove the motor guard
18
from the body
2
, then remove the lining
36
and seal
31
.
Remove the PCB
33
from its guides in the body. Disconnect the strip socket on the PCB,
then remove the connector from the switch
26
.
Lift the cord rewinder
27
and place it where the motor is.
Bend out three catches
z2
of the body
(
fig. 2)
and push out the rewinder insert
12
. Pass
the power cord plug through the opening and remove the rewinder.
Remove two screws
105
from the inside of the body and release four
catches
fixing the
button cover
4
.
Remove the switch button
6
and the rewinder button
5
from the button
cover, loosen screw
105
and remove the control PCB
34
.
Remove the screws
105
from the handle
21
and remove the handle insert
22
, then
release the handle from the button cover
4
.
Unscrew two screws
103
securing the electrobrush socket to the body. Put the socket
through the opening in the body and remove the PCB
33
.
Use a screwdriver to pry the switch
26
and remove it from its socket in the body. Remove
the springs
41
from the sleeves in the body.
Bend out the catches to remove the wheels
38
from the sleeve in the body.
Remove the seal
31
from outlet filter area of the body
2
.
In order to disassemble the remote assembly 559.0050 from the hose handle:
1. separate the suction hose (tube) from the handle 539.0001
2. slide a rod with a thickness of approx. 5 mm, length of approx. 150-200 mm with a
flattened head (or a flathead screwdriver) towards the technological opening, until it
touches the remote.
Use sufficient force to disengage the remote control from the handle.
