INTRODUCTION
Carl Zeiss
SDA Stand for Stereomicroscopes
6
B 46-0075 e 05/06
1.2
Notes on instrument safety
The SDA Stand for Stereomicroscopes, including original accessories, must not be used for
applications other than those described in this manual. The manufacturer cannot assume any
liability for other applications, including those of individual modules or single components. This
also applies to any service or repair work that is not carried out by authorized service personnel.
In case of non-compliance, all warranty claims shall be forfeited.
1.3
Notes on warranty
The manufacturer guarantees that the instrument is free of material or manufacturing defects when
delivered. Possible defects must be notified to us immediately and steps be taken to minimize damage. If
notified of such a defect, the manufacturer is obligated to rectify it at his discretion, either by repairing
the instrument or delivering an intact replacement. No guarantee is provided for defects caused by
natural wear (wearing parts in particular) and improper use.
The instrument manufacturer shall not be liable for damage caused by faulty operation, negligence or
any other tampering with the instrument, particularly the removal or replacement of instrument
components, or the use of accessories from other manufacturers. Any such action shall lead to a forfeit
of all warranty claims.
With the exception of the work specified in this manual, no maintenance or repair of the instrument may
be undertaken. Repairs may only be carried out by Carl Zeiss service staff or persons expressly authorized
by Carl Zeiss. In case of any malfunction of the device, contact the responsible Carl Zeiss service agency.
Summary of Contents for Stemi 508
Page 1: ...SDA Stand for Stereomicroscopes Operating Manual...
Page 2: ......
