WSB ZPiezo CAN
INSTRUCTIONS FOR THE SAFE USE OF THE DEVICE
Carl ZEISS
Warning and information plates
07/2015
432339-9010-000
7
E
ng
lish
1.3 Warning and information plates
The following warning and information plates are fitted to the WSB ZPiezo CAN controller.
Fig. 1
Warning and information plates on the WSB ZPiezo CAN controller
1.4 Guarantee information
The device manufacturer guarantees that the device when delivered it is free of material and
manufacturing defects. Any defects that occur must be reported immediately, and everything
must be done to limit the extent of the defect. If such a defect is reported, the device
manufacturer undertakes to make good the defect, by either repairing the device or replacing it
with a new one free of defects. No warranty is given for defects arising from natural wear and tear
(in particular affecting wearing parts) or from improper use.
The device manufacturer accepts no liability for damage arising from incorrect operation,
negligence or tampering with the device, in particular arising from removal or exchange of parts of
the device or the use of accessories from other manufacturers. In such cases all clams under
warranty are void.
With the exception of the activities described in this operating manual, no maintenance or repair
work may be performed on the controller. Repairs may be performed only by Customer Service
specially authorised persons.
