START-UP
Carl Zeiss
Mounting Supporting Feet
VivaTome
18
423639-9000-701
M60-2-0046 e 05/2012
3.5
Mounting Supporting Feet
Before mounting VivaTome to the Axio Observer side port it is necessary to screw two
supporting feet to it.
•
Unscrew the two setscrews (Fig. 3-2/
1
)
approximately half way from the supporting
feet (Fig. 3-2/
2
) using an Allen key SW 3.
•
Hold the setscrews and screw them (Fig. 3-2/
2
)
into VivaTome as far as it will go.
•
Now, screw the supporting feet in or out to the
required height.
•
Turn the counternut (Fig. 3-2/
3
) downwards to
secure the supporting foot.
3.6
Mounting the Camera
The following cameras can be connected to the
scanhead:
−
AxioCam MRm
−
AxioCam HRm
All cameras are mounted in the same way.
•
Loosen the clamping screw (Fig. 3-3/
1
) (Allen
key SW 3) and remove the camera adapter
(Fig. 3-3/
2
) obliquely frontward from the holder
3
).
•
Pull off the dust caps from the camera adapter
and the camera.
Fig. 3-2
Mounting the supporting feet
Fig. 3-3
Removing the camera adapter
Summary of Contents for VivaTome
Page 1: ...VivaTome Operating Manual...