Zeiss VISUREF 150, User Manual

Page: 70 / 134

Operation of the device
000000-2227-967-GA-GB-281021
64
Measurement of pupil and corneal diameters
The following chart shows the Main control functions for measuring the
pupil or corneal diameter (Fig. 36).
Fig. 36 Main control functions in Pupil mode
Preparation of the device for measurement
Selecting the measurement mode
•
Select the desired patient from the patient list (see Section Patient
selection , page 47) or start anonymized measurement (default setting)
•
Select the
Pupil
menu in the upper navigation bar. As soon as the word
Pupil is displayed in blue, the Pupil measurement mode is enabled
( 2 , Fig. 38).
Fig. 37 Message that image data will be overwritten