Zeiss VISULAS YAG III User Manual Download Page 29

Page: 29 / 126

Performance specifications

000000-1272-175-GA-GB-060613

Useful life

WARNING - GENERAL HAZARDS
The development, production and maintenance of this device, together

with associated risks, are based on an expected service life of eight years,

assuming that the device is serviced at the specified intervals.
Modifications to the product or failure to follow the manufacturer’s

instructions may substantially reduce the expected service life and
significantly increase the risk associated with use of the device.
It is the responsibility of the institution operating this product to follow the

manufacturer’s instructions and to decide on the risk/benefit ratio upon

expiration of the expected service life or maintenance and inspection

intervals specified by the manufacturer.

Summary of Contents for VISULAS YAG III































































































































Search results

Summary of Contents for VISULAS YAG III

Reviews:

Related manuals for VISULAS YAG III

Brands by name

Popular brands

Zeiss VISULAS YAG III, User Manual

Search results

Summary of Contents for VISULAS YAG III

Reviews:

Related manuals for VISULAS YAG III

Brands by name

Popular brands