SET-UP
Carl Zeiss
Connecting the
Transillumination top 450 mot.
12
435500-9000-701
08/2012
3
SET-UP
3.1
General information
carefully prior to set-up and operation (see Section 1.2,
page 7).
The transillumination top 450 mot. is normally delivered together with the required tools and optional
accessories in several packages.
•
Remove all components from the packaging and check that all components described on the delivery
note and delivery scope (see page 9) are present.
•
Keep the original packaging for storage or for returning the instrument to the manufacturer, or
dispose of it properly.
•
The following system requirements must be observed:
−
Use of stand 450 (from 435430-9902-000 or later models)
−
Use of focus motor 2 or 3 as CAN distributor
−
Optional software:
−
EMS 3 (435610-9010-000 or later model)
−
ZEN 2011 (Blue Edition or later model)
−
Optional mechanical stages:
−
Mechanical stage S 150x100 R (435465-9010-000 or later models)
−
Mechanical stage S 150x100 mot. CAN (435465-9000-000 or later models)
−
Measuring stage S 150x100 mot. CAN (435465-9020-000 or later models)
3.2
Mounting the transillumination top 450 mot.
In the event that an Axio Zoom.V16 microscope system is not yet available or assembled, the
microscope must initially be installed and put into operation according to the separate
operating manual.
Fig. 2
Mounting transillumination top 450 mot.
