Zeiss Stratus OCT 3000, Service Manual

Page: 7 / 88

General Information
Stratus OCT Model 3000 Service Manual 3 2660021155438 A
Safety Information
WARNING: To prevent electric shock, the instrument must be plugged
into an earth grounded outlet. Do not remove or disable the ground
pin. Only an authorized Carl Zeiss Meditec service representative may
install the instrument.
WARNING: Do not use the printer or the instrument with an extension
cord or a power strip (multiple portable socket outlet). Failure to
observe this warning could result in electrical shock to the patient
and/or examiner.
WARNING: Do not open the instrument covers. Opening the instrument
covers could expose you to electrical and optical hazards.
WARNING: If the instrument is externally connected to non-medical
peripheral devices (i.e. printer, storage devices, etc.), the complete
system must comply with the system requirements in standard IEC
60601-1. This standard requires the usage of an Isolation Transformer
to power the non-medical peripheral device(s) if located within 1.5 m
from the patient. If the peripheral device is located outside the patient
environment (beyond 1.5 m) and is connected to the Stratus OCT, a
separation device must be used or there shall be no metal to metal
connection between the non-medical peripheral device and the Stratus
OCT.
The person or the responsible organization connecting additional
devices or reconfiguring the system must evaluate the complete system
to ensure compliance to the applicable IEC 60601-1 requirements.
The instrument operator must not attempt to touch the patient and the
peripheral device simultaneously.
WARNING: Do not reconfigure system components on the table, nor
add non-system devices or components to the table, nor replace
original system components with substitutes not approved by Carl Zeiss
Meditec. Such actions could result in failure of the table height
adjustment mechanism, instability of the table, tipping and damage to
the instrument, and injury to operator and patient.
WARNING: This instrument may cause ignition of flammable gases or
vapors. Do NOT use in the presence of flammable anesthetics such as
nitrous oxide, or in the presence of pure oxygen.
WARNING: Avoid tipping. Do not use the instrument on an uneven or
sloped surface. Also, do not roll the table in deep pile carpet or over
objects on the floor such as power cords. Failure to observe these
precautions could result in tipping of the instrument and/or table and
resulting injury to operator or patient and damage to the instrument.
CAUTION: Federal law restricts this device to sale by or on the order of a
Physician or Practitioner.