4 Installation | 4.5 Connecting the Primostar 3 HD IP Camera to a Storage Medium or Imaging Device
ZEISS
4.5.4.1 Connecting the Camera via Ethernet
Procedure
1. Insert the Ethernet cable into the jack on the reverse side of the Primostar 3 HD IP camera.
2. Insert the Ethernet cable's opposite connector into the corresponding socket on your
WLAN router.
3. Switch on the router.
à
Labscope
can recognize the network (network name and password are the same as in
the WLAN router setting).
62
Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en