Zeiss OPMI PROergo S7, Instructions For Use Manual

Page: 199 / 268

Version 11.0
G-30-1435-en
Page 199
S7 / OPMI PROergo What to do in the event of malfunctions
Failure of main functions
Failure of magnetic brakes
In the event of magnetic brake failure (magnetic brakes are closed), you can
manually position the microscope by overriding the locking effect of the
brakes.
Failure of the SpeedFokus (Autofocus) option
Failure of the SpeedFokus (autofocus) option while the rest of the OPMI
PROergo system is working correctly on the S7 system:
You can continue using your OPMI PROergo / S7 system, but you can no
longer benefit from the SpeedFokus autofocus option until it has been
repaired by the service staff.
• Continue surgery using the motorized focusing system of the OPMI
PROergo.
• Focus the image manually on the OPMI PROergo.
WARNING Risk of injury caused by failure of main functions!
If one of the main functions (focusing, zoom) is unavailable or is not
functioning correctly, this may result in serious injury to the patient.
• Deactivate the electronic components and proceed in manual mode.