Zeiss OPMI Lumera i on floor stand, Instructions For Use Manual

Page: 112 / 178

Operation OPMI Lumera
®
i on floor stand
Version 9.2
Page 112 G-30-1720-en
Configuring foot control panel
The “Foot control” menu permits you to assign user-specific functions to the
foot control panel:
– Set focusing
– Set magnification (zoom)
– Increase/reduce light intensity
– Select video mode
– Switch light source on/off
– Invert image
– Switch AUX (accessory equipment) on/off
Preconfigured button assignment
Buttons The functions of the buttons A, B, C, D, E, and F are preconfigured, but they
can be reassigned to meet the user’s specific requirements. The factory
settings are:
– Button A: light intensity
– Button B: light intensity
– Button C: no function
– Button D: no function
– Button E: switch light source on/off
– Button F: switch light source on/off
Joystick The joystick located between the buttons C and D is used to control the
XY coupling.
Rocker switches The default settings (focus/zoom) of the rocker switches are preconfigured
horizontally or vertically for each country. However, a ZEISS Service technician
can change the settings at any time. You can make user-specific settings
(see page 112) yourself at any time.
B
D
F
A
C
E
I
G
J
H