Zeiss opmi lumera 700, Instructions For Use Manual

Page: 48 / 236

3 Description of the device Instructions for Use
OPMI LUMERA 700 3.2 Device setup
48 / 236 G-30-1673-en - 14.0 - 2018-07-12
3.2.19 Connector panel
1
2
3
4 5
6
7 8 9 10 11 12
Figure 24: Connector panel (example with optional connections)
1 USB port for HD video and
image recording (optional) 2 USB service port
3 LAN 1 network connection
(optional) 4 Remote connection for
external devices with a
maximum switching capacity
of 24 V / 0.5 A.
5 Foot control panel
connection 6 IEC 60601-1 standard
potential equalization
connector
7 Sliding switch for rated
voltage 8 Connector panel for the
integrated HD camera
(optional)
9 Power outlet with max
voltage rating 100 - 240 V
AC, max 500 VA 10 Power inlet socket
11 Lemo socket for IDIS
(optional, only on external
CALLISTO eye Panel PC) 12 LAN 2 network connection
(optional)
3.2.20 Connector panel for the integrated HD camera
1
2 3
4
5
Figure 25: Connector panel for the integrated HD camera
1 Composite video output 2 Y/C video output (green)
3 HD-SDI video output 4 DVI-D video output