Incubation
5. Type in the temperature you would like to use
for your incubation, for either the insert,
or the incubation chamber
6. The numbers on the right hand side are the
actual temperature for the insert and the
incubation chamber
7. After you have completed your experiment
uncheck the H Insert P and H Unit XL and set
the temperature to zero.
NOTE: After you have unchecked the H Unit XL
make sure the lights on the Heating Unit XL S
are off then
Wait 15 Minutes
before you log out
out of Zen. This will allow the heating unit to cool
down.
8. After you log out of Zen, turn of f the TempModuleS and Heating Unit XL S
21
