10
14.
In CHANNELS toolbox, adjust the pinhole
at 1 AU (Airy unit) for each channel in
order to get the best resolution to signal
ratio.
15.
Adjust the GAIN (MASTER) at 550 for each
channel except for the T-PMT.
16.
Acquire in LIVE.
17.
Adjust the laser power for each channel.
18.
You can increase the (MASTER) GAIN to
decrease the laser power but the signal to
noise ratio will decrease.
19.
Don't increase the DIGITAL GAIN except if
the GAIN (MASTER) is really high.
20.
Adjust the DIGITAL OFFSET to improve the
image by increasing the signal to noise
ratio.
21.
To make all the adjustments, it is
recommanded to use the « Range
Indicator » LUT.
In this mode, saturated pixels are
red
and
black pixels are
blue
.
22.
14
15
17
19
21
20
21
