Zeiss Lightsheet Z.1 Operating Manual Download

Page: 178 / 427

CHAPTER 4 - SYSTEM OPERATION

Carl Zeiss

Startup and Shutdown of the System

Lightsheet Z.1

000000-1790-528

02/2013

1.1.3

Starting ZEN

ZEN

icon

Start ZEN software for operating the

Lightsheet Z.1 system.

•

Your Windows operating system is ready for use.

•

ZEN is installed successfully.

•

To start the software, double click the black

ZEN

icon

on your desktop!

During loading, the

ZEN Access

window will appear

(Fig. 2). It displays the ZEN symbol in the upper part, the

designation of the current ZEN software version (lower
left) and the Zeiss logo (lower right).
Once the program is loaded, the

Login ZEN

dialog will

appear (Fig. 3) in front of the ZEN interface. The number

after ZEN designates the current version.

•

By pressing the

? (question mark)

symbol, the

context sensitive

Help menu

will appear (Fig. 4).

Close the menu with the Windows commands if you
do not want to search the help database by pressing
the

x (cross)

symbol.

•

Pressing the

x (cross)

symbol, the

Login ZEN

dialog

will be closed and the ZEN software will not be

started.

The

Login ZEN

dialog allows you to boot the Software

in different modes. If the

Boot Status

is closed, the

options are

Start System

and

Image Processing

A third option,

Offline/Demo

, becomes available

(Fig. 5), once the

Boot Status

field is expanded by

pressing the

expansion

symbol (triangle).

You can collapse the field by pressing the expansion

symbol again. Select:

−

Start System

for system control, data / image

acquisition / recording and analysis. The whole

microscope system will be initialized. The progress
of the boot process will be displayed by the blue

time tab. During booting, the status of the system
will be displayed in the

Boot Status

window and

the single components will be listed which have
been or are currently being initialized during the

boot process (Fig. 6).

Fig. 2

Starting the ZEN software –
The Loading "ZEN" window

Fig. 3

Starting the ZEN software –

The Login "ZEN" dialog

Fig. 4

The Help menu dialog

Fig. 5

Starting the ZEN software – The
Login "ZEN" dialog with Boot
Status field expanded

Summary of Contents for Lightsheet Z.1












































































































































































































































































































































































































































Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands

Zeiss Lightsheet Z.1, Operating Manual

Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands