Zeiss Lightsheet Z.1 Operating Manual Download

Page: 179 / 427

CHAPTER 4 - SYSTEM OPERATION

Lightsheet Z.1

Startup and Shutdown of the System

Carl Zeiss

02/2013

000000-1790-528

When ZEN software is started for the first time, the

positioning units needs to be initialized. All doors
of the system must be closed and no sample can

be present in the system. The boot process will be

interrupted and a message (Fig. 7) will state to
remove the sample; do so if necessary and press

to continue with the boot process.

−

Offline/Demo

for data analysis and simulation.

Offline/Demo

reads the active hardware database

and simulates the respective hardware. This button
is only available after opening the

Boot Status

display by clicking the little arrow left of the text

"Boot Status" This option should be chosen when
working at an offline station and if you want to

test functionalities of the system. The progress of

the boot process will be displayed by the blue time
tab. The single components will be listed, which

are initialized during the boot process. Note that
the software will not control the hardware in this

mode.

−

Image Processing

for data analysis only. This

mode ignores the hardware and activates only data

handling and image processing functionality to

analyze stored images. Note that only those
software tools will be displayed that are needed for

processing and analysis of the data. No hardware
control tools will be shown.

−

Cancel

to abort the booting process and to leave

the dialog. Note that the

Cancel

button will

appear in the place of the

Image processing

button only if

Start System

Offline/Demo

was

selected (Fig. 6).

−

You can leave the software by choosing the

File

menu from the main tool area and selecting

Exit

−

You can select a database before booting, if you

wish to change the current one. To change the
database, open the

Hardware configuration

database

expansion field (Fig. 8). The expansion

field displays the currently loaded database and its

location on the hard disc.

Fig. 6

Starting the ZEN software – The
Login "ZEN" dialog with Boot

Status field expanded and during
the process of booting

Fig. 7

Message to remove sample, prior
to initialization of the
positioning unit

Fig. 8

Hardware configuration
database - The Login "ZEN"
dialog allows you to boot the
Software in different modes. If
the Boot Status is closed, the
options are Start System and
Image Processing.

Summary of Contents for Lightsheet Z.1












































































































































































































































































































































































































































Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands

Zeiss Lightsheet Z.1, Operating Manual

Search results

Summary of Contents for Lightsheet Z.1

Reviews:

Related manuals for Lightsheet Z.1

Brands by name

Popular brands