Calibration and Set-up
Humphrey FDT User Manual
2660021149532 Rev. B 2015-11
4-4
Software Upgrade
This instrument is designed with the ability to upgrade the operating software. For detailed
software upgrade information, reference the software upgrade instructions available from
authorized representatives.
The current software version is available in the ABOUT FDT SCREEN and on the bottom of
the each RESULTS PRINT-OUT.
Maintenance
This instrument requires no preventive inspection or maintenance. The only user
maintenance required is replacing the printer paper and surface cleaning as necessary.
Printer Paper Replacement
To load a new roll of paper, pull down the Paper Access Door (below the Operator LCD
Display) using the Finger Tabs on the sides of the door (near the top). Remove the empty
paper spool from the paper well.
Unwrap the paper from its bag, loosen the leading edge of the paper from the roll, and
place the new roll of paper into the paper well with the leading edge of the paper facing
toward the outside of the unit (toward you – see the diagram on the inside of the printer
door).
