Microscope Illuminator
Start-up
HBO 50
Starting up the ebq 50 ac lamp power supply
Carl Zeiss
M60-2-0014 e 05/2012
13
3.2
Starting up the ebq 50 ac
lamp power supply
Safe and reliable operation of the HBO 50
Microscope Illuminator requires that you know
the information provided by the supplied
operating instructions of the lamp power
supply ebq 50 ac.
Particularly observe the detailed safety notes.
1 Power switch
2 Hour meter
3 Power input connector with fuse F2
4 Connector for lamp plug
Fig. 4
ebq 50 ac lamp power supply
When the device is connected to the mains,
the full operating or starting voltage is available
at its output (danger to life!).
That's why, before any work on the device or
the connected components (lamp replacement)
completely disconnect the device from line
voltage by disconnecting the power cable.
•
Connect the connecting cable of the
microscope illuminator (1/
3
) to the lamp
connector (4/
4
) on the lamp power supply.
•
Using power cable (1/
2
), connect the lamp
power supply to the power outlet.
