Intended use
2-2
61211-1310402
CONTURA
Intended use
Warranty
The coordinate measuring machine (CMM) may be used only for its in-
tended purpose. The operator is liable for any damage incurred during
any reasonably foreseeable misuse.
CMM
The CMM can be used to determine the geometric sizes of workpieces.
The workpieces can be made of metal or plastic. Geometric sizes are
width, length, height as well as the diameter and depth of bores, for ex-
ample. For example, the position of bores is calculated from the measur-
ing data. Furthermore, the form of workpieces can be determined by
means of a special software.
NOTE
The CMM may be used only to determine geometric parameters of
workpieces. The CMM must not be used for any purposes other than
those listed below.
Only workpieces and objects required for measurement may be placed
on the measuring table.
Functions of the CMM:
–
Workpiece probing in six directions (±X, ±Y, ±Z).
The CMM can be moved in the X, Y and Z axes. Probing is per-
formed by means of a probing system. For measurement, the work-
pieces must be fastened on the measuring table.
–
The measuring table has the following functions:
–
Holding and securing one or more workpieces
–
Holding and securing qualification tools
–
Holding and securing a changer rack (optional)
–
Holding and securing a rotary table (optional)
–
Securing the workpieces and fastening the qualification tool,
changer rack and rotary table by use of the threaded bushings
provided in the measuring table.
–
Moving workpieces by means of the rotary table.
Summary of Contents for CONTURA
