Zeiss CONTURA, Operating Instructions Manual

Page: 142 / 158

Care
9-12
61211-1310402 CONTURA
– Clean the window using a dry, lint-free cloth or a brush.
Changer rack
Vacuum the changer rack and the holders and clean them with a mild
cleaning agent.
– Remove all cleaning agent residue.
Covers
Vacuum the covers and clean them with a damp cloth.
NOTE
The covers must not be removed.
Inspection measures
Checking the stylus system
Regular inspection of the stylus systems is required to ensure correct
workpiece measurement.
1 Check the styli at regular intervals.
2 Remove any particles or grease film from stylus tips.
3 Replace any damaged styli.
Cleaning or replacing the filter mats inside the
control box
The interior of the controller box is cooled by a fan. attached to the top
right. The intake port is located at the bottom left. Both ports are pro-
vided with filter mats. The filter mat in the intake port needs to be
cleaned or replaced at least every three months. The filter mat in the ex-
haust port must also be cleaned or replaced.
1 Intake port with air filter