5
4. Now you see the colored shims in the groove of the black lens barrel.
5. Place the PL mount on the lens in such a way that the groove on the rear side of
the PL mount fi ts over the silver screw on the lens barrel.
6. Tighten the eight torx screws with the T6 torque wrench using a torque of 0.4 Nm.
7. When the torx screws have been tightened, the lens can be fi tted to a camera
with a PL mount and used.
8. Check the fl ange focal distance of the lens (see section D) in combination with
your camera.
