4.
Now you see the colored shims in the groove of the black lens barrel.
5.
Place the PL mount on the lens in such a way that the groove on the rear side
of the PL mount fits over the silver screw on the lens barrel.
6.
Tighten the eight torx screws with the T6 torque wrench using a torque of 0.4 Nm.
7.
When the torx screws have been tightened, the lens can be fitted to a camera
with a PL mount and used.
8.
Check the flange focal distance of the lens (see section D) in combination with your camera.
screw of the lens barrel.
1.
Remove the rear lens cap.
2.
Remove the four torx screws of the silver EF mount with a T6 torque wrench
and place the mount and the screws on one side.
The size of the black inner ring depends on the focal length of the lens and is securely
fastened to the EF mount (or F, MFT or E Mount) at the factory.
3.
Remove the eight torx screws of the black EF adapter ring and place the ring
and the screws on one side.
The silver support bracket is already installed on the EF adapter ring at the factory and does
not need to be removed.
C. Changing the mount
4
5
