ZEISS
SWITCHING ON SAFELY
Colibri 5/7
8
423052-6044-008
09/2017
Englis
h
10
SWITCHING ON SAFELY
Colibri 5/7 does not have a separate on / off switch.
After mounting it to a microscope it only has to be connected to a power outlet.
•
Connect the Colibri 5/7 desktop power supply unit (Fig. 3/
7
) with a power supply cable to a power
outlet.
After a short initialization time Colibri 5/7 is ready for operation.
•
Switch on the microscope.
•
Start the control software used (from ZEN 2.3 (blue edition) or third-party software).
If the control panel or the LED Trigger Box are connected, they will be powered via Colibri 5/7 and are
also ready for use.
Depending in the existing microscope equipment, ensure the correct connection type as follows:
•
Connect the connection cable of the desktop power supply unit (Fig. 3/
7
) to the
Power
connection
socket (Fig. 3/
5
) of the lamp module (Fig. 3/
1
).
•
If used, connect the control panel (Fig. 3/
8
) with connecting cable to the
Remote
connection socket
2
) of the lamp module.
•
If used, connect the LED Trigger Box (Fig. 3/
9
) with connecting cable to the
Breakout
connection
socket (Fig. 3/
3
) of the lamp module.
•
If the microscope has a TFT display, connect the
CAN
connection socket (Fig. 3/
4
) of the lamp module
via the CAN cable to the microscope stand.
•
If Colibri 5/7 is to be controlled via a third-party software on the PC, connect the
USB
connection
socket (Fig. 3/
6
) of the lamp module via USB cable to the PC.