Page 2 sur 25
WF-Zeiss_EN_V3 24/01/2017
Switch on the temperature controller
It’s important to switch on the temperature at least 30 minutes before the beginning of the
session. Once your sample is put on the system and you saved the positions you wanted to
acquire, to avoid ab important focus shift in z, it’s best to wait at least 1 hour and re-set the
focus on your positions
1.
Turn on the temperature controller with the red switch.
2.
Choose the desired temperature (displayed in green) with the buttons up (+) and
down (-).
The real temperature is displayed in red.
