INSTALLATION INSTRUCTIONS AND FIRST-TIME SET-UP
Axio Observer
Connecting the microscope to the mains
ZEISS
12/2016
431004-7244-001
63
4.18
Connecting the microscope to the mains
•
Plug the power supply cable into the power socket of the Axio Observer 3, 3 materials or
Axio Observer 5, 5 materials.
The Axio Observer 7, 7 materials is supplied with
voltage from the external power supply unit
VP232-2.
•
Insert the connecting plug of the power supply
unit VP232-2 into the corresponding socket
(Fig. 45/
2
) on the rear side of the stand.
•
Plug the power supply cable of the power
supply unit VP2322 into a power outlet.
4.19
Switching the microscope and the
power supply (ballast) unit for the
HBO 100 on and off
Axio Observer 3, 3 materials:
•
Switch the microscope on and off using the
power switch (on the left of the stand,
Fig. 48/
1
).
Axio Observer 5, 5 materials:
•
Switch the microscope on and off using the
standby button (Fig. 48/
1
).
Axio Observer 7, 7 materials:
•
Switch on the external power supply unit
VP232-2 using the power switch (Fig. 47/
1
).
•
Start up the microscope using the standby
button (on the left of the stand, Fig. 48/
1
).
•
To switch the microscope off, press the standby button then switch off the external power supply unit.
The monitoring LED (Fig. 48/
3
) lights up when the microscope is switched on.
Power supply unit (ballast unit):
•
If a fluorescence illuminator (e.g. HBO 100) is connected, switch the power supply unit on (Fig. 48/
2
)
and off using the power switch.
Fig. 47
External power supply unit VP232-2
for Axio Observer 7, 7 materials
Fig. 48
Axio Observer and power supply
unit (ballast unit) for HBO 100
Summary of Contents for Axio Observer Series
Page 1: ...Axio Observer Inverted microscope Operating manual...
Page 192: ......