OPERATION
Axio Imager
Illumination and contrast methods
Carl Zeiss
M70-2-0020 e 06/2009
430000-7344-001
179
If the microscope is equipped with the phototube Pol, the following settings are required for
this contrast method:
– The Bertrand lens must be inactive (rear push-pull rod (4-135/
6
) on right side pulled out).
– The luminous-field diaphragm must be open (front push-pull rod (4-135/
5
) turned
counterclockwise as far as it will go).
– The crossline reticle must be inactive (front push-pull rod (4-135/
5
) pulled out).
Fig. 4-135 Components for reflected-light polarization