26
Changing the motor
AURA
®
handheld NIR - Rev. 2
Maintenance and Repair Manual | AURA
®
handheld NIR - Rev. 2 | EN_40_070_0030I
Fig. 23 Laying the cable - details
3.2
2
4.2
2.1
3.1
4.1
12
Screw on the front panel
Finally, attach the front panel as follows:
– First screw the 2 screws above and below the front panel back into the
housing.
– Then screw the 3 screws on the side of the front panel back into the
housing.
– Tighten all 7 screws.
(See also “Fig. 12 Remove the fastening screws on the front panel” on page
18)
