13
Changing the display
AURA
®
handheld NIR - Rev. 2
EN_40_070_0030I | AURA
®
handheld NIR - Rev. 2 | Maintenance and Repair Manual
6
Lay down the display
Place the display
1
on the rubber display protectors
2
.
Fig. 7
2.2
1
2.1
Lay down the display
7
Install a new display
Carry out the previous disassembly work steps 1 to 5 in reverse order.
Note
NOTE REGARDING ASSEMBLY
When plugging in the display cable, make sure that the cable end marked
in blue is in the correct position. The blue marking must be visible!
