background image

 
 

Shutdown

 

 

EN_20_012_0043l 

10

 

Shutdown

 

Systems without UPS can still carry voltage for up to 10 seconds after the 
device has been unplugged from the line. The storage instructions must also 
be observed. 

11

 

Disposal

 

The electronic components used in the device, such as the main board, bus 
board, hard drive, the power supply unit, etc., must not be disposed of as 
domestic waste. Instead, they must be disposed of by appropriate specialist 
companies. 

In accordance with the requirements set down in the EU directive on Waste 
Electrical and Electronic Equipment 2012/19/EU (WEEE Directive), this device 
must be labelled with a WEEE logo in accordance with standard DIN EN 
50419.  

  

(crossed-through garbage can with stripes under the symbol) 

12

 

Other provisions

 

Keep these installation instructions with the device. These installation in-
structions should be included if the device is passed on to third parties. 

In the version delivered, this device fulfils the requirements set down by the 
EMC directive 2014/30/EC and LVD directive 2014/35/EC. 

In its condition upon delivery, this device conforms to the conditions in the 
RoHS directive (2011/65/EU) incl. 2015/863/EU) on the restriction of the use 
of certain hazardous substances in electrical and electronic equipment. 

This equipment has been tested and found to comply with the limits for a 
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment 
in a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense. This 
class A digital device conforms to the Canadian "Interference-Causing Digital 
Equipment Standard ICES-0003" stipulations and requirements. 

These installation instructions are valid for the product families ZEISS Server. 

Summary of Contents for 5034555













Reviews: