Zeiss 15501-0101-000, Instruction Manual, Page: 5 / 282

ZEISS 1 General Information | 1.1 Text Conventions and Link Types
1 General Information
This Instruction Manual is considered to be part of the Primostar 1. Herein after referred to as Mi-
croscope.
This Instruction Manual contains basic steps and safety information that must be observed during
operation and maintenance. Therefore, the Instruction Manual must be read by the operator prior
to commissioning and must always be available at the place of use of the Microscope. This In-
struction Manual is an essential part of the Microscope and, if the Microscope is resold, the In-
struction Manual must remain with the Microscope or be handed over to the new owner.
1.1 Text Conventions and Link Types
The following text conventions and link types are used:
Text convention Meaning
Click Start .
Press the STANDBY button.
Press [Enter] on the keyboard.
The names of controls and important infor-
mation are shown in bold letters.
Press <Ctrl+Alt+Del> Press several keys on the keyboard simultane-
ously.
Select Tools > Goto Control Panel > Air-
lock .
Follow a path in the software.
Text input Text to be entered by the user
Programming and Macros
Anything typed in literally during program-
ming, including, for example, macro codes,
keywords, data types, method names, vari-
ables, class names, and interface names.
Tab. 1: Text convention
Link type Meaning
See: Text Conventions and Link Types [
}
5] . Link to further information for this topic.
https://www.zeiss.com/corporate/int/
home.html
Link to a website on the internet.
Tab. 2: Link types
1.2 Further Applicable Documents
Please take also note of the following documents:
Brochures and
Certificates
For Brochures, ISO certificates, CSA certificates and EU declarations of conformity ask your ZEISS
Sales & Service Partner.
Local and National
health and safety
regulations
Local and national health and safety regulations should be adhered to for the site and the use of
the Microscope. Please consult with your ZEISS Sales & Service Partner in the event of these regu-
lations conflicting with the installation requirements of the Microscope.
Safety data sheets Observe the enclosed safety data sheets. The instructions and guidelines given in the respective
safety data sheets must be complied with.
System and 3rd
Party Components,
Accessories
The Microscope can be configured in many ways. Information about the individual components,
enhancements and accessories can be obtained from your ZEISS Sales & Service Partner. Also refer
to the 3rd Party documentation of the manufacturer.
Instruction Manual ZEISS Primostar 1 | en-US | Rev. 2 | 415501-7021-111 5