5
1. Getting started with BIKE all in one
1.1 Intended use
BIKE all in one
is intended to be used exclusively within the bike which was sold with. Any
attempt to mount
BIKE all in one
on another bike will void warranty claims.
BIKE all in one
is not permitted for competition and race use.
1.2 Initial operation
BIKE all in one
can only be activated when the battery state of charge is sufficient. In
order to check the battery state of charge of your
BIKE all in one
please refer to 4.1.
1.3 Turning on the system
BIKE all in one
turns on automatically when the rear wheel reaches a speed higher than
5 km/h. Thus, to turn on
BIKE all in one
just start pedaling your bike as usual or spin the
wheel while you lift the bike, as explained in Figure 1 .
1.4 Turning off the system
BIKE all in one
automatically turns off when no activities are detected within 2 minutes, in
order to reduce the idle battery use.
I
2
3
Figure 1: in order to turn on BIKE all in one, lift the bike (1), push the pedal
(2) such that the rear wheel spins fast (3).
Summary of Contents for BIKE all in one
Page 1: ...USER MANUAL ...
Page 2: ...This page was intentionally left blank ...
Page 37: ...Your Notes ...
