manualshive.com logo in svg

Zehnder Rittling VS 09, Installation, Operation And Maintenance Manual

Share
Download
Zehnder Rittling VS 09 Installation, Operation And Maintenance Manual Download Page 30

28

Return panel 
installation

■

■

Install the provided adhesive-
backed gasket material on the 
outer perimeter of the cabinet to 
seal the return panel to the cabinet.

■

■

Install the cabinet return panel. 
Refer to the Framing Rough-in 
Detail drawing on page 12, the 
Return Panel drawings on pages 32 
through 34 and to the information to 
the right for additional direction.

Install supply grilles over the 
cabinet discharge openings as 
follows:

■

■

Insert the grille into the cabinet 
supply duct extension(s). 
Assure that the grille flange 
rests against the drywall 
covering the cabinet.

■

■

Secure the grille to the drywall 
with the screws provided.

Supply grille installation

Table 12: Supply grille sizes and arrangements

Unit

Single discharge (1)

Double discharge (2)

Triple discharge (3)

VHN 09

14" x 12"

10" x 8"

Not recommended

VHN 12

14" x 12"

10" x 8"

Not recommended

VHN 15

14" x 12"

10" x 8"

10" x 8"

VHN 18

14" x 12"

10" x 8"

10" x 8"

VHN 24

Not recommended

12" x 10"

12" x 10"

VHN 30

Not recommended

12" x 10"

12" x 10"

VHN 36

Not recommended

12" x 10"

12" x 10"

Summary of Contents for VS 09

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands