Installation (INSTALLER)
Refer to the full manual of the ComfoAir Q for the necessary
information and the applicable safety regulations. Always
install the equipment as specified in the latest regulations for
installation of your country. The full installation must obey the
applicable (safety) regulations as specified in:
The local EU Standard on safety provisions for low-voltage
installations.
The manufacturer's assembly/installation manual.
Menu structure: INSTALLER SETTINGS
The symbol
is displayed when the installer password is correct.
Do not forget to log out when the installation is completed.
1.
Select and hold SHIFT for at least 4 seconds on the main
screen.
2.
Enter the password with the up and down buttons. Refer to
the full installation manual for the password.
3.
Select CONFIRM after each number.
Installation of the air ducts
and the condensation drain
Maintenance space
Installation on the wall
3
This menu is only visible when the accessory is connected to the ComfoAir Q.
≥250 mm
≥1065 mm
635 mm
Supply and extract air
on the left side
Ø 32 mm
G 1 ¼”
min. 500 Pa
Extract air
Outdoor air
Supply air
Exhaust air
Outdoor air
Extract air
Exhaust air
Supply air
Supply and extract air
on the right side
1 m
INSTALLER SETTINGS
OPTION BOX SETTINGS³
BATHROOM SWITCH
POSTHEATER³
0-10V INPUT 1³
COMMISSIONING
MAIN BOARD SETTINGS
VENTILATION PRESETS
VENTILATION CONTROL
FILTER SETTINGS
ALTITUDE
FIREPLACE PRESENT
0-10V INPUT 2³
0-10V INPUT 3³
0-10V INPUT 4³
HEAT EXCHANGER TYPE
DIRECT FAN CONTROL
LOGOUT
RESET
SERVICE MODE
FUNCTION SENSOR³
0-10V PRIORITY³
RESET ANALYSIS
FACTORY DEFAULTS
RESET ERRORS
PERIPHERALS ERRORS
UNBALANCE
LEFT HANDED UNIT
RIGHT HANDED UNIT
EN - 3