3 - EN
2 For the Fitter
2.1 ComfoAir configuration
The standard ComfoAir configuration consists of:
■
External casing (A) of coated sheeting;
■
Interior (B) of high-quality, expanded polypropylene EPP;
■
4 connections (C) for the air ducts;
■
2 plate filters (D) for air purification. Filter classification: outside air G4, return air G4;
■
2 energy-efficient DC motors (E) with high-efficient fan;
■
HE (High efficient) heat exchanger (F);
■
Display (G) to read data, and for programming procedures (optional);
■
Control circuit board (H) with connections for the fans, the bypass, the Pre heater, temperature sensors (T1 to
T4), the 3-position switch with or without malfunction indicator (optional) and the bathroom switch (optional);
■
Connector panel (H) with all the extra connections of the ComfoAir Luxe;
■
Identification plate (I) detailing information on the ComfoAir (not visible);
■
Condensation drain (J) to drain the condensation of the warm return air;
■
Sticker (K) detailing the air connections (not visible);
■
Cable for power supply (not visible);
■
2 Filtercaps (M);
■
4 Ceiling mounting brackets (N) or 1 Wall mounting bracket (not visible).
