Getting Started
2
Installation
Basic Connections
1. Connect an HDMI cable from one of the
HDMI In
ports on the ZyPerMX4 to an HD video
source.
2. Connect an Ethernet cable from the TRANSPORT connector, on the rear panel of the
ZyPerMX4, to a LAN or directly to the PC.
3. Connect the included 12V DC power supply to the POWER connector on the rear panel of
the ZyPerMX. (If not using PoE)
Connecting to the ZyPerMX4
By default, each ZyPerMX4 encoder uses a DHCP IP address if a DHCP server is found on the
network. Otherwise the ZyPerMX4 will assign itself a Link-Local address. In order to connect to
the unit, and depending upon your network setup, it may be necessary to adjust the IP settings
of the computer so that it can connect to the ZyPerMX4. (
Note the IP address of the ZyPerMX4
can be obtained by looking at the LED panel on the unit.
)
Once the computer is reconfigured, launch a browser, and enter the IP address of ZyPerMX4 in
the address bar to display the ZyPerMX4 Maestro web interface.
See
Logging In (page 3)
for more information on logging in to the Maestro web interface.
See
Network Configuration (page 4)
for details on setting a static IP address.
Sample Application Diagram
Summary of Contents for ZyPerMX4
Page 1: ...User Manual July 2018 ZyPerMX4 Quad Video Encoder...
Page 31: ...3 Appendix...
