21
► Using the
Reset
Button/Wheel (NAV / Control)
1. Locate the NAV / Control button on the front of the unit. This is both a button and
wheel.
2. Disconnect power from the ZyPerMX4. Press and hold the NAV / Control button while
applying power. Release once the LED screen presents options. Rotate dial to the
Right to reset the ZyPerMX4 to factory defaults. Rotate dial to the left to revert the
ZyPerMX4 to previously installed version of firmware.
3. The unit will reboot and after about 60 seconds, the unit will be ready for use.
Rebooting
the
ZyPerMX4
The ZyPerMX4 can be rebooted using Maestro. All configuration settings are saved through
reboots.
1. Login to the Maestro web interface. See Logging In (page 3) for more information.
2. Click the Device tab.
3. Click the Reboot button, under Actions.
4. Confirm the Reboto action to initiate the reboot.
Basic Operation
Summary of Contents for ZyPerMX4
Page 1: ...User Manual July 2018 ZyPerMX4 Quad Video Encoder...
Page 31: ...3 Appendix...
