Page 6
|
ZyPer4K Configuration Guide
www.zeevee.com
Setting Up ZyPer4K in a Many to Many Environment
A many to many, or switched environment involves connecting many sources to many displays.
ZyPer4K allows you a flexible and scalable amount of input-output options without limitations.
For example, in a 24-port configuration, you can configure a 1x23, 6x18, or 4x20 (and so on) system.
A network switch is needed in these many to many configurations. These environments also require
configuration through the ZyPer4K management software.
To set up ZyPer4K in a many to many environment, you have to:
• Install ZyPer4K management software
• Connect all Encoders and Decoders to the 10Gb network switch
• Switch (or route) video from sources to displays
ZyPer4K Encoders
Media Players
HDMI
HDMI
Software Management Platform
(required)
Fiber
Multi-Mode
ZyPer4K Decoders
10 GigaBit Ethernet
Fiber Switch
HDMI
RS-232
HDTVs
HDMI
Laptop
1Gb Ethernet
HDMI
Blu-Ray Player
IR
HDMI
RS-232
(Airshow)
(Wildlife)