16
17
ZvRemote
Numeric Keypad
After installing Zviewer software,* the numeric
keypad allows “triple-tap” text entry . Enter text
as if text-messaging on a cell phone .
To enter this mode, press the “INPUT” key (an
on-screen keyboard pops up).
Press “INPUT” again to exit triple-tap mode .
*Download Zviewer software for free at
www .zeevee .com .
0-9 Buttons
: Enter numbers or
letters in application
CLEAR:
“Escape” (esc)
key on a
keyboard
ENTER:
“Enter” on
a keyboard
Tips and Troubleshooting
1.
ZvRemote is unresponsive.
•
Ensure that the batteries are properly installed.
•
ZvRemote’s touchpad is designed to “sleep” when not in use, in order to save batteries. Press the
ZV mode button to “wake” ZvRemote when you’re ready to use it.
2.
ZvRemote works intermittently or yellow LED blinks.
•
Ensure that the antenna on ZvReceiver is screwed in tightly.
•
Position ZvReceiver differently; keep it away from objects made of metal or stone, which reduce
operating range.
•
Replace ZvRemote’s batteries.
•
Out of range of ZvReceiver. Try moving closer to your computer.*
3.
ZvRemote’s LED flashes yellow after a key press but nothing happens.
•
ZvReceiver is not installed or active. Ensure ZvReceiver is plugged into the USB port of your computer.
•
Out of range of ZvReceiver. Try moving closer to your computer.*
*If range problems persist, adding a USB extender may solve the problem. Get more information on USB
extenders at www .zeevee .com/support .
ZvRemote
