8
9
ZvRemote
ZvRemote
Mode Buttons
Pressing a mode button tells the remote which
device you want to control .
ZV
: Sets remote to control computer .
TV1, TV2, TV3
: Selects which TV or system
is controlled (or the
“active”
TV), which is
selected by pressing TV1, TV2, or TV3 .
For example, TV1 could be in the family room,
TV2 in the office, and TV3 in the bedroom.
Install Batteries
Insert AA batteries in compartment on back, as shown.
“Pair” ZvRemote with ZvReceiver
ZvRemote must be “paired” with ZvReceiver in order
to communicate with it. Normally, when you first
install the batteries in ZvRemote, it automatically
pairs with ZvReceiver (if ZvReceiver is plugged into
the computer). If necessary, you can manually pair
the two:
1. On ZvReceiver press the “connect” button and a
yellow light will blink
2 . On ZvRemote, press and hold the
and
but-
tons until a blue light flashes on ZvReceiver.
2
1
