Page 10
|
ZvMXE User ’s Manual
www.zeevee.com
ZvMXE User ’s Manual
|
Page 11
To program a key the following sequence shall be executed:
Step1: Press and hold the “SET” button for three
seconds
The RED LED lights immediately when the button is pressed
After 3 seconds the LED changes to a very bright state
Step 2: Press the key you wish to program (P1-P5)
The RED LED changes to a slow flash (1/second)
Step 3: Press the key on the remote that you are
copying
The RED LED performs three quick flashes to acknowledge
RED LED turns on solid again.
Repeat steps 2 and 3, or simply wait for light to extinguish
Step 4: Test Programmed key on television or device to
be controlled
If command is not executing properly, repeat steps 1-3
Programmable Buttons
The upper-left portion of the remote
houses a set of programmable keys. The
intent is to allow for common television
functions to be programmed so the
user only needs to use a single remote
control device to manage their television
experience when using the ZvMXE
receiver/decoder.
Keys P1 though P5 can be set to any
function the user desires. The labeling is present only to provide visual cues
the user may use to help remember which key has been programmed to
which function.
The “SET” key has a fixed function that is not programmable. It initiates the
programming process for setting the P1-P5 key functions.
Programming P1-P5 Buttons
The ZvMXE remote has been tested to be compatible with a large number
of remotes. However, some manufacturers use infrared codes that are
obscure and cannot be “copied” into the programmable keys of the ZvMXE
remote.
ZvMXE Remote