- 5 -
10. Set
PULSE
WIDTH
It is output pulse width (duration) in us. It affect on CDI triggering. Recommended setting is
200us or 100us.
Enter menu and move to
Pulse Width
with pressing + or - and then press enter .
Now you can change pulse width with pressing + or - (in 100us steps) and then press
enter .
11.
Set SHIFT LIGHT
Enter menu and move to
Shift Light
with pressing + or - and then press enter .
Now you can change rev point with pressing + or - (in 100 rpm steps) and then press
enter .
12.
Set REMOTE SW
Enabling or disabling external switch for changing ignition curves while riding.
Enter menu and move to
Remote SW
with pressing + or - and then press enter .
Now you can enable or disable external switch with pressing + or - and then press enter .
13.
MECHANICAL SETTINGS (Static Angle)
Static Angle
is ignition advance angle, set with stator (generator).
Measure this angle with dial gauge. This measured
Static Angle
is your maximum advance
angle you can set with
VCDI
.
Example:
Measured Static Angle = 39.2deg (this angle you must enter in VCDI)
Calculating mm to deg or vice versa:
