- 5 -
11.
MECHANICAL SETTINGS (Static Angle)
Static Angle
is ignition advance angle, set with stator (generator).
Measure this angle with dial gauge. This measured
Static Angle
is your maximum advance
angle you can set with
PSR
.
Example:
Measured Static Angle = 39.2deg (this angle you must enter in PSR)
Calculating mm to deg or vice versa:
12. MONITORING
Connect
programmer
to
PSR
and wait few seconds for activation of
programmer.
Fist
information displayed on the
programmer
is software version.
With
programmer
you can watch revs, calculated advance ignition angle.
Information!
You can connect or disconnect
PSR
unit from
programmer
any time you want, without any
harm. It is not important, if motor running, or not and if power supply is connected or not.
Important!
Do not use too much force when connecting or disconnecting
programmer
unit!
