5. Line Settings
23
For Unregister-type (P2P) IP Line, you do not need to set the proxy and register proxy, FXS is
only used for internal extensions, you should config route to make call between each other. See
chapter 6 Call Settings.
5.2.1
FXS line List
•
ID:
the real position of FXS interface card on GA90, like "slot1-1" which means the 1st FXS
interface card on the 1st slot is FXSmodule.
•
Phone Number:
the phone number of this line
Note:
Unset FXS module is only shown FXS module's interface number in this list. You should
set phone number for corresponding ports when using them.
5.2.2
Parameters Descriptions
•
Phone Number:
the phone number of this line which is same as user number and password
usually.
•
Username*:
you need to set this username when FXS is register-type.
•
Password*:
you need to set this username when FXS is register-type.
Figure 5-3
Line Settings - FXS Line Setting page